Seat/Lane Filling

In this tutorial , I will show you how to set up wired to fill lanes/seats. This is found in events such as races where the pods must be filled up with one user. 

• 1x Gate
• Rollers 
• Wired Stack 1: You will need 1 stack per seat. 5 seats needs 5 stacks of wired.
  1x Wired Trigger: User Walks ON Furni
  1x Wired Effect: Teleport To Furni
  1x Wired Negative Condition: Furni Has NO Users 
• Wired Stack 2: You will need  only 1 stack
  1x Wired Trigger: User Walks ON Furni
  1x Wired Effect: Teleport To Furni
  1x Wired Condition: Furni Has Users (You may need more if you have more than 5 seats)

Stack your wired as shown in the image below.




Double click the User Walks ON Furni Wired, and select the gate.



​

Step 3

Double click the Teleport To Furni Wired, and select the seat.




Double click the Furni Has No Users Wired, and select the seat.

Step 5

Repeat previous stepsfor each chair.




Double click the User Walks ON Furni Wired, and select the gate.

Step 7

Double click the Teleport To Furni Wired, and select the first roller in the queue.




Double click the Furni Has Users Wired, and select  ALL the seats. (If you have more than 5 seats you will need more of this wired)

• Wired Stack 1 works by checking if the seat is empty, if it is the user will be teleported to it. This is useful as if a user leaves, the gate will teleport them to empty seats in the middle.
• Wired Stack 2 works by checking if all the seats are full, if they are, when a user steps on the gate they will be teleported off of it. This prevents users from blocking the gate when they are not teleported.
• You can make the seats be filled in order by adding a Wired Condition: Furni Has Users on all stacks After the 1st stack, and then selecting the previous chair.